Top 5 Maintenance Tips for Long-Lasting Power Tools
That’s why you must maintain them in top condition. A few of them tend to be quite costly. So, it’s more important to care for them and maintain them.
But power tools are ignored quite often, leading to poor performance, especially if you buy cheap tools. Apart from that instances of breakdowns and injuries have also been reported.
So, in this article, we’re sharing 5 maintenance tips that will remarkably enhance the performance and lifespan of your power tools. Let’s begin!
Clean the Tools After Every Use
For your tools to live long and prosper, clean them after each application. Maximum users possibly have read that somewhere in their maintenance manual. However, they prefer neglecting it.
Understandably, cleaning is the last thing on your mind after a hectic schedule. However, it isn’t that hard and won’t take much time of your precious time. Begin simply by wiping your tools with a clean, soft cloth to eliminate all dirt and debris. Also, check small crevices on your tools. Utilize an air compressor or a pipe cleaner to access them.
Allow the Tools to Cool Down
If your tool is becoming hot or begins shutting down, immediately stop using it and allow it to cool down. In this manner, you won’t wear out the motor or damage other parts of your tool.
However, there could be some other reasons for overheating of tools apart from running them for too long. You may apply too much or too little pressure while using them. Moreover, certain brands are more prone to overheating compared to others. A California Power Tool Store properly explains that to the buyers.
Consider overheating an important parameter while purchasing new tools. The key thing is to let your tools cool down. Remember that your tools also deserve to take a break. Else, they'll overheat and be overused and damaged.
Tighten the Bolts and Screws
The regular use of your expensive machines will inevitably cause some loose bolts and screws. You may fail to address the loosening and continue operating your tools in such conditions.
For example, the efficiency of your tools might reduce or even worsen your tools to be severely damaged.
So, you must check your bolts and screws regularly and tighten all those that appear to be a bit lose. For this purpose, you can use many tightening tools such as drills, screwdrivers, wrenches, etc.
Sharpen the Bits and Blades
Although dulling is a natural process, dull bits and blades can strain the motor, minimizing the efficiency of your chainsaws, circular saws, drills, broaching machines, and other tools.
So, to avoid downtime and expensive repairs and replacements, sharpen the working bits and blades.
Many symptoms might indicate it’s time to sharpen your blade. For example, there could be a change in the sound of your saw. Even the blade might begin tearing the wood. Moreover, a dull blade will take longer to cut through material compared to a sharp one.
The frequency of sharpening depends on how regularly you use your tool and the materials you use it on.
If it's difficult to drill a hole into softer materials, it’s time to sharpen it.
Lubricate Your Power Tools
Another to prolong the life of your tools is adequate lubrication. Lubricating your power tools prevents chafing, corrosion, and overheating.
Choose the appropriate lubricant for your tool. Various lubricants have different viscosity. Certain tools may need wax. Others require graphite.
Find out which lubricant suits your tool from the user’s manual. There’s information on the frequency of application. If lubrication is done at proper intervals, the movable parts of your tools become long-lasting. Applying the proper lubricant at regular intervals optimizes the life of your power tools.
Inference
If you purchase your power tools from the best online tool store in California, then they’ll guide you about the proper usage and maintenance of the tools.
Comments
Post a Comment